■Application

1.Duplex Service Drop
Primarily used for overhead service applications such as outdoor lighting, street lighting. and temporary service for construction. To be used at voltages of 600V phase-to-phase or less and at conductor temperatures not to exceed 75°c for polyethylene insulated conductors or 90°c for cross liked polyethylene(XLPE) insulated conductors.
2.Triplex Service Drop
The triplex service drop cable (Overhead ABC Triplex Cable) is suitable for use as drop cable from a pole-mounted transformer, to the service entrance of a structure, or as secondary distribution between poles. The cables should be limited to the voltage of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross linked polyethylene(XLPE) insulated conductors.
3.Quadruplex Service Drop
The quadruplex cables (Overhead Conductor ABC Cable) are suitable for use as drop cable from a pole-mounted transformer, to the service entrance of a structure, or as secondary distribution between poles. The cables should be limited to the voltages of 600 volts or less (phase to phase) at conductor temperatures not to exceed 75°C for polyethylene insulation conductors or 90°C for cross linked polyethylene(XLPE) insulated conductors.

■Structure

For the ABC Aerial Cable (Aerial Twisted Aluminum ABC Cable),the phase conductors are concentrically stranded compressed 1350-H19 aluminum and insulated polyethylene or cross linked polyethylene(XLPE), The neutral messengers are concentrically stranded AAC, ACSR, or 6201 aluminum alloy. The conductors are manufactured with ridges for phase identification(one conductor with one ridge, one conductor with two ridges ,one conductor is plain).

■Standard

Products can be manufactures according to IEC standard,ASTM standard,BS standard,DIN and other standard and customizable cable.

■Download

■Duplex Service Drop

■Note

(1)Designated sizes are: ACSR 6/1 diameter equivalent and AAC with equivalent resistivity per ASTM B-399 for 6201.
(2)Conductor temperature of 90°C for XLPE, 75°C for PE; ambient temperatures of 40°C; emissivity 0.9; 2ft./sec/wind in sun.

■Triplex Service Drop

■3.Quadruplex Service Drop

■Note

(1)Designated sizes are: ACSR 6/1 diameter equivalent and AAC with equivalent resistivity per ASTM B-399 for 6201.
(2)Conductor temperature of 90°C for XLP, 75°C for poly; ambient temperatures of 40°C; emissivity 0.9; 2ft./sec/wind in sun.