01Metro FO Cable

This is large-capacity optical cable (ribbon or loose tube cable, 144F/288F/432F or higher) for configuring urban optical networks.

02Access FO Cable

This is a medium-capacity optical cable (loose tube cable, mostly 12F~144F) for configuring the access optical network.

03Drop FO Cable

This is an optical cable (mostly 1F~12F) used in the last section (drop section) of an optical network

04Indoor FO Cable

This is an indoor optical cable (Tight Buffer or Loose Tube type, mostly 1F~48F) applied to the fiber network inside buildings.

05ABC Solution

This is a solution for configuring an optical network by installing ABC (Air Blown Cable, 12F~288F).

06ABF Solution

This is a solution for configuring an optical network by installing ABF (Air Blown Fiber, 2F~12F).

07Rack

This is installed in the communication room for installing communication equipment and optical connection panels.

08ODF(Optical Distribution Frame) & Closure

This is a connection closure for protecting the panels for optical cable connection and optical connector works, and the access points between optical cables.

09Closure

This is a connection box for protecting the access points between optical cables. This is used for manholes and buried/overhead cables.

10Splitter

This is an optical element that evenly distributes the light signals in a single optic fiber on a network to several optic fibers.

11FDH(Fiber Distribution Hub)

This is a solution for configuring an optical network by installing ABC (Air Blown Cable, 12F~288F).

12TB(Termination Box) & Outlet

This is an outlet installed inside a building. It is connected to the optical connection termination box (TB) and the end of the cable that connects the connection cable and the drop cable.

13Fiber Jumper Cord

This is a cord used for connecting near optical devices. It has optical connectors (SC, LC, etc.) at both ends.